Snmp-Server Enable Traps - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
snmp-server enable traps
snmp-server enable traps
Use the snmp-server enable traps global configuration command to enable the switch to send Simple
Network Management Protocol (SNMP) notifications for various traps or inform requests to the network
management system (NMS). Use the no form of this command to return to the default setting.
Syntax Description
bgp
bridge [newroot]
[topologychange]
config
copy-config
cpu threshold
Cisco ME 3400 Ethernet Access Switch Command Reference
2-542
snmp-server enable traps [bgp | bridge [newroot] [topologychange] | config | copy-config | cpu
threshold | {dot1x [auth-fail-vlan | guest-vlan | no-auth-fail-vlan | no-guest-vlan]} | entity
| envmon [fan | shutdown | status | supply | temperature] | ethernet | flash | hsrp | ipmulticast
| mac-notification | msdp | ospf [cisco-specific | errors | lsa | rate-limit | retransmit |
state-change] | pim [invalid-pim-message | neighbor-change | rp-mapping-change] |
port-security [trap-rate value] | rtr | snmp [authentication | coldstart | linkdown | linkup |
warmstart] | storm-control trap-rate value | stpx [inconsistency] [root-inconsistency]
[loop-inconsistency] | syslog | tty | vlan-membership | vlancreate | vlandelete]
no snmp-server enable traps [bgp | bridge [newroot] [topologychange] | config | copy-config |
cpu threshold | {dot1x [auth-fail-vlan | guest-vlan | no-auth-fail-vlan | no-guest-vlan]} |
entity | envmon [fan | shutdown | status | supply | temperature] | ethernet | flash | hsrp |
ipmulticast | mac-notification | msdp | ospf [cisco-specific | errors | lsa | rate-limit |
retransmit | state-change] | pim [invalid-pim-message | neighbor-change |
rp-mapping-change] | port-security [trap-rate value] | rtr | snmp [authentication | coldstart
| linkdown | linkup | warmstart] | storm-control trap-rate value | stpx [inconsistency]
[root-inconsistency] [loop-inconsistency] | syslog | tty | vlan-membership | vlancreate |
vlandelete]
(Optional) Enable Border Gateway Protocol (BGP) state-change traps.
Note
(Optional) Generate Spanning Tree Protocol (STP) bridge MIB traps. The
keywords have these meanings:
•
•
(Optional) Enable SNMP configuration traps.
(Optional) Enable SNMP copy-configuration traps.
(Optional) Allow CPU-related traps.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
This keyword is supported only when the metro IP access image is
running on the switch.
newroot—(Optional) Enable SNMP STP bridge MIB new root traps.
topologychange—(Optional) Enable SNMP STP bridge MIB topology
change traps.
OL-9640-07
Hide quick links:
Advertisement
Table of Contents
