Cisco ME 3400 Command Reference Manual page 670
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
traceroute mac
If the source or destination MAC address belongs to multiple VLANs, you must specify the VLAN to
which both the source and destination MAC addresses belong. If the VLAN is not specified, the path is
not identified, and an error message appears.
The Layer 2 traceroute feature is not supported when multiple devices are attached to one port through
hubs (for example, multiple CDP neighbors are detected on a port). When more than one CDP neighbor
is detected on a port, the Layer 2 path is not identified, and an error message appears.
This feature is not supported in Token Ring VLANs.
Examples
This example shows how to display the Layer 2 path by specifying the source and destination MAC
addresses:
Switch# traceroute mac 0000.0201.0601 0000.0201.0201
Source 0000.0201.0601 found on con6[ME-3400-24TS] (2.2.6.6)
con6 (2.2.6.6) :Gi0/1 => Gi0/3
con5
con1
con2
Destination 0000.0201.0201 found on con2[WS-C3550-24] (2.2.2.2)
Layer 2 trace completed
This example shows how to display the Layer 2 path by using the detail keyword:
Switch# traceroute mac 0000.0201.0601 0000.0201.0201 detail
Source 0000.0201.0601 found on con6[ME-3400-24TS] (2.2.6.6)
ME-3400-24TS / 2.2.6.6 :
con5 / WS-C2950G-24-EI / 2.2.5.5 :
con1 / WS-C3550-12G / 2.2.1.1 :
con2 / WS-C3550-24 / 2.2.2.2 :
Destination 0000.0201.0201 found on con2[WS-C3550-24] (2.2.2.2)
Layer 2 trace completed.
This example shows how to display the Layer 2 path by specifying the interfaces on the source and
destination switches:
Switch# traceroute mac interface fastethernet0/1 0000.0201.0601 interface fastethernet0/3
0000.0201.0201
Source 0000.0201.0601 found on con6[ME-3400-24TS] (2.2.6.6)
con6 (2.2.6.6) :Gi0/1 => Gi0/3
con5
con1
con2
Destination 0000.0201.0201 found on con2[WS-C3550-24] (2.2.2.2)
Layer 2 trace completed
Cisco ME 3400 Ethernet Access Switch Command Reference
2-644
(2.2.5.5
(2.2.1.1
(2.2.2.2
Gi0/2 [auto, auto] => Gi0/3 [auto, auto]
Fa0/3 [auto, auto] => Gi0/1 [auto, auto]
Gi0/1 [auto, auto] => Gi0/2 [auto, auto]
Gi0/2 [auto, auto] => Fa0/1 [auto, auto]
(2.2.5.5
(2.2.1.1
(2.2.2.2
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
)
:
Gi0/3 => Gi0/1
)
:
Gi0/1 => Gi0/2
)
:
Gi0/2 => Gi0/1
)
:
Gi0/3 => Gi0/1
)
:
Gi0/1 => Gi0/2
)
:
Gi0/2 => Gi0/1
OL-9640-07
Hide quick links:
Advertisement
Table of Contents
