Show Platform Frontend-Controller - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
show platform frontend-controller
show platform frontend-controller
Use the show platform frontend-controller privileged EXEC command to display counter and status
information for the front-end controller manager and subordinate applications and to display the
hardware and software information for the front-end controller.
Syntax Description
buffer
generic
manager number
subordinate number
version number
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(25)EX
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco ME 3400 Ethernet Access Switch Command Reference
C-10
show platform frontend-controller {buffer | generic | manager number | subordinate number |
version number} [ | {begin | exclude | include} expression]
Display the last 1024 bytes sent from the manager to the subordinate and the
reverse.
Display the generic counters that do not specifically apply to the manager or
subordinate.
Display the counters for the manager and the subordinate specified by
number. See the "Usage Guidelines" section for the number range.
Display the subordinate status and the counters for the subordinate specified
by number. See the "Usage Guidelines" section for the number range.
Display the hardware and software version information for the subordinate
status specified by number. The range is from 0 to 1.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C
Cisco ME 3400 Ethernet Access Switch Show Platform Commands
OL-9640-07
Hide quick links:
Advertisement
Table of Contents
