Priority - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)

Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:

Table of Contents

priority

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

To configure the priority in a QoS policy map class, use the priority command in QoS policy class map

configuration submode. To disable this feature, use the no form of the command.

Syntax Description

The default priority is low.

Command Modes

QoS policy map class configuration submode.

Command History

Usage Guidelines

Before you can configure the priority in a QoS policy map class you must first:

The following example shows how to select the QoS policy class-map1 and configure the frame priority

switch(config-pmap)# class class-map1

switch(config-pmap-c)# priority high

Operation in progress. Please check class-map parameters

switch(config-pmap-c)#

Related Commands

qos class-map

qos policy-map

Cisco MDS 9000 Family Command Reference

priority {high | low | medium}

no priority {high | low | medium}

Configures the frames matching the class-map as high priority.

Configures the frames matching the class-map as low priority. The default.

Configures the frames matching the class-map as medium priority.

Modification

This command was introduced.

Enable the QoS data traffic feature using the qos enable command.

Configure a QoS class map using the qos dwrr-q command.

Configure a QoS policy map using the qos policy-map command.

Configure a QoS policy map class using the class command.

Enables the QoS data traffic feature on the switch.

Configures a QoS class map.

Configure a QoS policy map.

OL-18089-01, Cisco MDS NX-OS Release 4.x