Pwwn (Sdv Virtual Device Configuration Submode) - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)

Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:

Table of Contents

pwwn (SDV virtual device configuration submode)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

pwwn (SDV virtual device configuration submode)

To add a pWWN to a virtual device, use the pwwn command in SDV virtual device configuration

submode. To remove a pWWN from a virtual device, usethe no form of the command.

Syntax Description

Command Modes

SDV virtual device configuration submode.

Command History

Usage Guidelines

The following example shows how to add a pWWN to a virtual device.

switch# config terminal

Enter configuration commands, one per line. End with CNTL/Z.

switch(config)# sdv virtual-device name sqa2 vsan 1

switch(config-sdv-virt-dev)# pwwn 21:00:00:04:cf:cf:45:40

Related Commands

show sdv statistics

Cisco MDS 9000 Family Command Reference

pwwn pwwn-name [primary]

no pwwn pwwn-name [primary]

Specifies the pWWN of a real device. The format is

hh:hh:hh:hh:hh:hh:hh:hh, where h is a hexadecimal number.

Configures the virtual device as a real device.

Modification

This command was introduced.

Enables or disables SAN device virtualization.

Displays SAN device virtualization statistics.

OL-18089-01, Cisco MDS NX-OS Release 4.x