Scsi-Flow Distribute - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual
Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Configuration manual (700 pages) ,
- Messages manual (518 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Chapter 21
S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
scsi-flow distribute
To enable SCSI flow distribution through CFS, use the scsi-flow distribute command. To disable the
SCSI flow distribution, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
SCSI flow distribution is enabled.
Command Modes
Configuration mode.
Command History
Release
2.0(2)
Usage Guidelines
You must enable the SCSI flow feature on the Storage Services Module (SSM) before you can configure
a SCSI flow. Use the ssm enable feature module slot-number command to enable the SCSI flow feature
on the SSM.
Examples
The following example enables distribution of SCSI flow services using CFS.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# scsi-flow distribute
The following example disables distribution of SCSI flow services.
switch(config)# no scsi-flow distribute
Related Commands
Command
ssm enable feature
show santap module
OL-18089-01, Cisco MDS NX-OS Release 4.x
scsi-flow distribute
no scsi-flow distribute
Modification
This command was introduced.
Description
Enables the SCSI flow feature on the SSM.
Displays SCSI flow configuration and status.
End with CNTL/Z.
Cisco MDS 9000 Family Command Reference
scsi-flow distribute
21-11
Advertisement
Table of Contents
