Displaying Proxy Initiator Information - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual
Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)
Hide thumbs
Also See for AP776A - Nexus Converged Network Switch 5020:
- Command reference manual (1640 pages) ,
- Configuration manual (1486 pages) ,
- Reference (886 pages)
Table of Contents
Advertisement
Chapter 43
Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Buffer Stats:
Displaying Proxy Initiator Information
If the proxy initiator feature is enabled in the iSCSI interface, use the show interface iscsi command to
display configured proxy initiator information (see
Example 43-4 Displays Proxy Initiator Information for the iSCSI Interface with System-Assigned
switch# show interface iscsi 4/1
iscsi4/1 is up
Example 43-5 Displays Proxy Initiator Information for the iSCSI Interface with User-Assigned WWNs
switch# show interface iscsi 4/2
iscsi4/2 is up
OL-18084-01, Cisco MDS NX-OS Release 4.x
Buffer less than header size:0, Partial:45231, Split:322
Pullup give new buf:0, Out of contiguous buf:0, Unaligned m_data:0
WWNs
Hardware is GigabitEthernet
Port WWN is 20:c1:00:05:30:00:a7:9e
Admin port mode is ISCSI
Port mode is ISCSI
Speed is 1 Gbps
iSCSI initiator is identified by name
Number of iSCSI session: 0, Number of TCP connection: 0
Configured TCP parameters
Local Port is 3260
PMTU discover is enabled, reset timeout is 3600 sec
Keepalive-timeout is 60 sec
Minimum-retransmit-time is 300 ms
Max-retransmissions 4
Sack is disabled
QOS code point is 0
Forwarding mode: pass-thru
TMF Queueing Mode : disabled
Proxy Initiator Mode : enabled<----------------------------Proxy initiator is enabled
nWWN is 28:00:00:05:30:00:a7:a1
pWWN is 28:01:00:05:30:00:a7:a1
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
Input 7 packets, 2912 bytes
Command 0 pdus, Data-out 0 pdus, 0 bytes
Output 7 packets, 336 bytes
Response 0 pdus (with sense 0), R2T 0 pdus
Data-in 0 pdus, 0 bytes
Hardware is GigabitEthernet
Port WWN is 20:c1:00:05:30:00:a7:9e
Admin port mode is ISCSI
Port mode is ISCSI
Speed is 1 Gbps
iSCSI initiator is identified by name
Number of iSCSI session: 0, Number of TCP connection: 0
Configured TCP parameters
Local Port is 3260
PMTU discover is enabled, reset timeout is 3600 sec
Keepalive-timeout is 60 sec
Example 43-4
and
Example
(system-assigned)<----System-assigned nWWN
(system-assigned)<---- System-assigned pWWN
Cisco MDS 9000 Family CLI Configuration Guide
Configuring iSCSI
43-5).
43-33
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
