Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 1120
Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)
Hide thumbs
Also See for AP776A - Nexus Converged Network Switch 5020:
- Command reference manual (1640 pages) ,
- Configuration manual (1486 pages) ,
- Reference (886 pages)
Table of Contents
Advertisement
iSCSI Authentication Setup Guidelines and Scenarios
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
* fcid 0x750001 [pwwn 21:00:00:20:37:6f:fe:54]
* fcid 0x750101 [pwwn 21:00:00:20:37:a6:a6:5d]
Start the iSCSI clients on both hosts and verify that sessions come up.
Step 13
Display the iSCSI sessions to verify the Fibre Channel target and the configured WWNs.
Step 14
switch# show iscsi session
Initiator iqn.1987-05.com.cisco:01.e41695d16b1a
Session #1
Session #2
iqn.1987-05.com.cisco:05.172.22.92.166.07-01.21000020376ffd97
Display the iSCSI initiator to verify the configured nWWN and pWWN.
Step 15
switch# show iscsi initiator
iSCSI Node name is iqn.1987-05.com.cisco:01.e41695d16b1a
Virtual Port WWN is 20:02:00:0b:fd:44:68:c2 (configured)
Check the Fibre Channel name server.
Step 16
switch# show fcns database vsan 1
VSAN 1:
-----------------------------------------------------------------
FCID
-----------------------------------------------------------------
0x680001 NL
0x680102 N
Cisco MDS 9000 Family CLI Configuration Guide
43-76
pwwn 20:06:00:0b:fd:44:68:c2
Initiator ip addr (s): 10.11.1.10
Discovery session, ISID 00023d000001, Status active
Target
VSAN 1, ISID 00023d000001, Status active, no reservation
Initiator ip addr (s): 10.11.1.10
iSCSI alias name: oasis10.cisco.com
Node WWN is 20:03:00:0b:fd:44:68:c2 (configured)
Member of vsans: 1
Number of Virtual n_ports: 1
Interface iSCSI 7/1, Portal group tag: 0x300
VSAN ID 1, FCID 0x680102
TYPE PWWN
21:00:00:20:37:6f:fd:97 (Seagate) scsi-fcp:target
20:02:00:0b:fd:44:68:c2 (Cisco)
<-----------------Host is not online
<----------
<----
(VENDOR)
FC4-TYPE:FEATURE
scsi-fcp:init iscw
OL-18084-01, Cisco MDS NX-OS Release 4.x
Chapter 43
Configuring iSCSI
<----
To Fibre Channel
target
The configured nWWN
The configured pWWN
<---
iSCSI initiator
in name server
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
