Configuring Mgcp Timeout Values; Verifying And Monitoring Mgcp Inspection - Cisco 7604 Configuration Manual
Catalyst 6500 series switch and cisco 7600 series router firewall services module configuration guide using the cli
Hide thumbs
Also See for 7604:
- Configuration manual (1011 pages) ,
- Installation manual (324 pages) ,
- User manual (98 pages)
Table of Contents
Advertisement
Chapter 22
Applying Application Layer Protocol Inspection
hostname(config-pmap-c)# service-policy policy_map_name [global | interface interface_ID]
hostname(config)#
where policy_map_name is the policy map you configured in
to traffic on all the interfaces, use the global option. If you want to apply the policy map to traffic on a
specific interface, use the interface interface_ID option, where interface_ID is the name assigned to the
interface with the nameif command.
The FWSM begins inspecting MGCP traffic, as specified.
Example 22-10
policy to the outside interface. This creates a class map to match MGCP traffic on the default ports (2427
and 2727). This configuration allows call agents 10.10.11.5 and 10.10.11.6 to control gateway
10.10.10.115, and allows call agents 10.10.11.7 and 10.10.11.8 to control both gateways 10.10.10.116
and 10.10.10.117. The maximum number of MGCP commands that can be queued is 150. The service
policy is then applied to the outside interface.
Example 22-10 Enabling and Configuring MGCP Inspection
hostname(config)# access-list mgcp_acl permit udp any any eq 2427
hostname(config)# access-list mgcp_acl permit udp any any eq 2727
hostname(config)# class-map mgcp-traffic
hostname(config-cmap)# match access-list mgcp_acl
hostname(config-cmap)# mgcp-map sample_map
hostname(config-mgcp-map)# call-agent 10.10.11.5 101
hostname(config-mgcp-map)# call-agent 10.10.11.6 101
hostname(config-mgcp-map)# call-agent 10.10.11.7 102
hostname(config-mgcp-map)# call-agent 10.10.11.8 102
hostname(config-mgcp-map)# gateway 10.10.10.115 101
hostname(config-mgcp-map)# gateway 10.10.10.116 102
hostname(config-mgcp-map)# gateway 10.10.10.117 102
hostname(config-mgcp-map)# command-queue 150
hostname(config-mgcp-map)# policy-map sample_policy
hostname(config-pmap)# class mgcp_port
hostname(config-pmap-c)# inspect mgcp sample_map
hostname(config-pmap-c)# service-policy sample_policy interface outside
Configuring MGCP Timeout Values
The timeout mgcp command lets you set the interval for inactivity after which an MGCP media
connection is closed. The default is five minutes.
The timeout mgcp-pat command lets you set the timeout for PAT xlates. Because MGCP does not have
a keepalive mechanism, if you use non-Cisco MGCP gateways (call agents), the PAT xlates are torn
down after the default timeout interval, which is 30 seconds.
Verifying and Monitoring MGCP Inspection
The show mgcp commands command lists the number of MGCP commands in the command queue. The
show mgcp sessions command lists the number of existing MGCP sessions. The detail option includes
additional information about each command (or session) in the output. The following is sample output
from the show mgcp commands command.
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
OL-20748-01
shows how to identify MGCP traffic, define a MGCP map, define a policy, and apply the
MGCP Inspection
Step
5. If you want to apply the policy map
22-69
- Quick Links:
- C H a P T E...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
