Netbios Inspection - Cisco 7604 Configuration Manual
Catalyst 6500 series switch and cisco 7600 series router firewall services module configuration guide using the cli
Hide thumbs
Also See for 7604:
- Configuration manual (1011 pages) ,
- Installation manual (324 pages) ,
- User manual (98 pages)
Table of Contents
Advertisement
NetBIOS Inspection
hostname(config-pmap)# class inspection_default
hostname(config-pmap-c)# inspect mgcp mgcp-inspect
Output of show conn in admin context, which shows the connections established between IOS MGCP
gateways and call agents:
hostname(config)# show conn
6in use, 48 most used
UDP out 15.0.0.210:2427 in 10.100.100.1:2427 idle 0:00:04 Bytes 5790 FLAGS - g
UDP out 209.165.201.1:2427 in 10.0.0.210:2427 idle 0:00:00 Bytes 8221 FLAGS - g
UDP out 209.165.201.1:18199 in 10.100.100.1:19247 idle 0:00:03 Bytes 14080 FLAGS - g
UDP out 209.165.201.1:18199 in 10.100.100.1:19246 idle 0:00:00 Bytes 4030838 FLAGS - g
TCP out 10.0.0.210:2428 in 10.100.100.1:12695 idle 0:00:04 Bytes 1346 FLAGS - UOI
TCP out 209.165.201.1:15954 in 10.0.0.210:2428 idle 0:00:00 Bytes 1346 FLAGS - UBOI
Multicast sessions:
IPV6 connections:
IOS MGCP gateway configuration of router R2:
hostname(config)# interface FastEthernet 0/1
hostname(config-if)# ip address 209.165.201.1 255.0.0.0
hostname(config-if)# no shut
hostname(config-if)# ip host FWSM-CCM-14 10.0.0.210
hostname(config-if)# exit
hostname(config)# ip route 10.0.0.0 255.0.0.0 209.165.201.2
hostname(config)# mgcp
hostname(config)# mgcp call-agent FWSM-CCM-14
hostname(config)# mgcp dtmf-relay voip codec all mode out-of-band
hostname(config)# ccm-manager mgcp
hostname(config)# ccm-manager config server 10.0.0.210
hostname(config)# ccm-manager config
hostname(config)# dial-peer voice 100 pots
hostname(config-dial-peer)# application mgcpapp
hostname(config-dial-peer)# port 1/0/0
hostname(config-dial-peer)# no shut
IOS MGCP gateway configuration of router R1:
hostname(config)# interface FastEthernet 0/1
hostname(config-if)# ip address 10.100.100.1 255.0.0.0
hostname(config-if)# no shut
hostname(config-if)# exit
hostname(config)# ip route 10.0.0.0 255.0.0.0 10.100.100.2
hostname(config)# ccm-manager mgcp
hostname(config)# ccm-manager music-on-hold
hostname(config)# ccm-manager config server 10.0.0.210
hostname(config)# ccm-manager config
hostname(config)# mgcp
hostname(config)# mgcp call-agent FWSM-CCM-14
hostname(config)# mgcp dtmf-relay voip codec all mode out-of-band
hostname(config)# dial-peer voice 101 pots
hostname(config-dial-peer)# application mgcpapp
hostname(config-dial-peer)# port 3/0/0
NetBIOS Inspection
NetBIOS inspection is enabled by default.
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
22-72
Network Processor 1 connections
Network Processor 2 connections
Network Processor 1 connections
Network Processor 2 connections
Chapter 22
Applying Application Layer Protocol Inspection
OL-20748-01
- Quick Links:
- C H a P T E...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
