Cisco 7604 Configuration Manual page 80

Catalyst 6500 series switch and cisco 7600 series router firewall services module configuration guide using the cli

Hide thumbs Also See for 7604:

Table of Contents

Managing Memory for Rules

-----------+---------+----------+-----------

-----------+---------+----------+-----------

Total Partition size - Configured size = Available to allocate

You can also view the current mapping of contexts to partitions using the show resource acl-partition

To identify the partition you want to reduce in size, enter the following command in the system execution

hostname(config)# resource partition number

Where number is between 0 and 11 by default. If you changed the number of partitions, the partition

numbering starts with 0. So if you have 10 partitions, the partition numbers are 0 through 9.

To reduce the partition size, enter the following command:

hostname(config-partition)# size number_of_rules

Where number is the number of rules you want to assign to the partition, in this case a lower number

than was shown in the show resource partition command. Use the no form of this command to return

to the default.

To reduce the size of other partitions, repeat Steps

To view the rules now available for increasing partition sizes, enter the show resource partition

For example, if you reduced the sizes of partitions 0 through 5 to 15,000, then the output shows that you

have 25,314 rules to reallocate to other partitions.

hostname(config)# show resource partition

-----------+---------+----------+-----------

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

Configuring Security Contexts

Show Quick Links

Table of Contents

Troubleshooting