Deleting A Vlan - Cisco Catalyst 2950 Software Configuration Manual
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Command reference manual (686 pages) ,
- Software configuration manual (674 pages)
Table of Contents
Advertisement
Configuring Normal-Range VLANs
Command
Step 4
exit
Step 5
show vlan {name vlan-name | id vlan-id} Verify your entries.
Step 6
copy running-config startup config
To return the VLAN name to the default settings, use the no vlan vlan-id name or no vlan vlan-id mtu
VLAN configuration command.
This example shows how to use VLAN configuration mode to create Ethernet VLAN 20, name it test20,
and add it to the VLAN database:
Switch# vlan database
Switch(vlan)# vlan 20 name test20
Switch(vlan)# exit
APPLY completed.
Exiting....
Switch#
Deleting a VLAN
When you delete a VLAN from a switch that is in VTP server mode, the VLAN is removed from the
VLAN database for all switches in the VTP domain. When you delete a VLAN from a switch that is in
VTP transparent mode, the VLAN is deleted only on that specific switch.
You cannot delete the default VLANs for the different media types: Ethernet VLAN 1 and FDDI or
Token Ring VLANs 1002 to 1005.
When you delete a VLAN, any ports assigned to that VLAN become inactive. They remain associated
Caution
with the VLAN (and thus inactive) until you assign them to a new VLAN.
Beginning in privileged EXEC mode, follow these steps to delete a VLAN on the switch by using global
configuration mode:
Command
Step 1
configure terminal
Step 2
no vlan vlan-id
Step 3
end
Step 4
show vlan brief
Step 5
copy running-config startup config
To delete a VLAN by using VLAN configuration mode, use the vlan database privileged EXEC
command to enter VLAN configuration mode and the no vlan vlan-id VLAN configuration command.
Catalyst 2950 Desktop Switch Software Configuration Guide
13-12
Purpose
Update the VLAN database, propagate it throughout the administrative
domain, and return to privileged EXEC mode.
(Optional) If the switch is in VTP transparent mode, the VLAN
configuration is saved in the running configuration file as well as in the
VLAN database. This saves the configuration in the switch startup
configuration file.
Purpose
Enter global configuration mode.
Remove the VLAN by entering the VLAN ID.
Return to privileged EXEC mode.
Verify the VLAN removal.
(Optional) If the switch is in VTP transparent mode, the VLAN
configuration is saved in the running configuration file as well as in
the VLAN database. This saves the configuration in the switch startup
configuration file.
Chapter 13
Configuring VLANs
78-11380-04
Advertisement
Table of Contents
Troubleshooting
