Monitoring And Maintaining The Dhcp Server Access Point; Show Commands - Cisco 1941W Configuration Manual
Cisco 3900 series, cisco 2900 series,
cisco 1900 series
Hide thumbs
Also See for 1941W:
- Hardware installation manual (102 pages) ,
- Installing and upgrading (24 pages)
Table of Contents
Advertisement
Configuring the Access Point to Provide DHCP Service
Command
Step 6
default-router address [address2 ...
address 8]
Step 7
end
Step 8
show running-config
Step 9
copy running-config startup-config
Use the no forms of these commands to return to default settings.
The following example shows how to configure the wireless device as a DHCP server, how to exclude a
range of IP address, and how to assign a default router:
AP# configure terminal
AP(config)# ip dhcp excluded-address 172.16.1.1 172.16.1.20
AP(config)# ip dhcp pool wishbone
AP(dhcp-config)# network 172.16.1.0 255.255.255.0
AP(dhcp-config)# lease 10
AP(dhcp-config)# default-router 172.16.1.1
AP(dhcp-config)# end
Monitoring and Maintaining the DHCP Server Access Point
The following sections describe commands you can use to monitor and maintain the DHCP server access
point:
•
•
•
show Commands
To display information about the wireless device as DHCP server, enter the commands in
privileged EXEC mode.
Table 4
Command
show ip dhcp conflict [address]
show ip dhcp database [url]
show ip dhcp server statistics
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
334
Purpose
Specifies the IP address of the default router for DHCP clients on the
subnet. One IP address is required; however, you can specify up to eight
addresses in one command line.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
show Commands, page 334
clear Commands, page 335
debug Command, page 335
Show Commands for DHCP Server
Purpose
Displays a list of all address conflicts recorded by
a specific DHCP Server. Enter the wireless device
IP address to show conflicts recorded by the
wireless device.
Displays recent activity on the DHCP database.
Use this command in privileged EXEC
Note
mode.
Displays count information about server statistics
and messages sent and received.
Chapter
Administering the Wireless Device
Table
4, in
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
