Configuring The Access Point For Secure Shell; Understanding Ssh; Clear Commands; Debug Command - Cisco 1941W Configuration Manual
Cisco 3900 series, cisco 2900 series,
cisco 1900 series
Hide thumbs
Also See for 1941W:
- Hardware installation manual (102 pages) ,
- Installing and upgrading (24 pages)
Table of Contents
Advertisement
Chapter
Administering the Wireless Device
clear Commands
To clear DHCP server variables, use the commands in
Table 5
Command
clear ip dhcp binding
{address | *}
clear ip dhcp conflict
{address | *}
clear ip dhcp server statistics
debug Command
To enable DHCP server debugging, use the following command in privileged EXEC mode:
debug ip dhcp server {events | packets | linkage}
Use the no form of the command to disable debugging for the wireless device DHCP server.
Configuring the Access Point for Secure Shell
This section describes how to configure the Secure Shell (SSH) feature.
For complete syntax and usage information for the commands used in this section, see the "Secure Shell
Note
Commands" section in Cisco IOS Security Command Reference for Release 12.4.
Understanding SSH
SSH is a protocol that provides a secure, remote connection to a Layer 2 or Layer 3 device. There are
two versions of SSH: SSH version 1 and SSH version 2. This software release supports both SSH
versions. If you do not specify the version number, the access point defaults to version 2.
SSH provides more security for remote connections than Telnet by providing strong encryption when a
device is authenticated. The SSH feature has an SSH server and an SSH integrated client. The client
supports the following user authentication methods:
•
•
For more information about SSH, see Part 5, "Other Security Features" in the Cisco IOS Security
Configuration Guide for Release 12.4.
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Clear Commands for DHCP Server
RADIUS (for more information, see the
on page
305)
Local authentication and authorization (for more information, see the
for Local Authentication and Authorization" section on page
Configuring the Access Point for Secure Shell
Table
5, in privileged EXEC mode.
Purpose
Deletes an automatic address binding from the
DHCP database. Specifying the address argument
clears the automatic binding for a specific (client)
IP address. Specifying an asterisk (*) clears all
automatic bindings.
Clears an address conflict from the DHCP
database. Specifying the address argument clears
the conflict for a specific IP address. Specifying
an asterisk (*) clears conflicts for all addresses.
Resets all DHCP server counters to 0.
"Controlling Access Point Access with RADIUS" section
"Configuring the Access Point
328)
335
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
