Cisco Catalyst 3560-X Software Configuration Manual page 1144
Hide thumbs
Also See for Catalyst 3560-X:
- Command reference manual (1188 pages) ,
- Software configuration manual (1438 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Configuring Protocol-Independent Features
Command
Step 15
set as-path {tag | prepend
as-path-string}
Step 16
set level {level-1 | level-2 | level-1-2 |
stub-area | backbone}
Step 17
set metric metric value
Step 18
set metric bandwidth delay reliability
loading mtu
Step 19
set metric-type {type-1 | type-2}
Step 20
set metric-type internal
Step 21
set weight
Step 22
end
Step 23
show route-map
Step 24
copy running-config startup-config
To delete an entry, use the no route-map map tag global configuration command or the no match or no
set route-map configuration commands.
You can distribute routes from one routing domain into another and control route distribution.
Beginning in privileged EXEC mode, follow these steps to control route redistribution. Note that the
keywords are the same as defined in the previous procedure.
Command
Step 1
configure terminal
Step 2
router {bgp | rip | ospf | eigrp}
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
1-98
Purpose
Modify the BGP autonomous system path.
Set the level for routes that are advertised into the specified area of the
routing domain. The stub-area and backbone are OSPF NSSA and
backbone areas.
Set the metric value to give the redistributed routes (for EIGRP only).
The metric value is an integer from -294967295 to 294967295.
Set the metric value to give the redistributed routes (for EIGRP only):
•
bandwidth—Metric value or IGRP bandwidth of the route in
kilobits per second in the range 0 to 4294967295
•
delay—Route delay in tens of microseconds in the range 0 to
4294967295.
•
reliability—Likelihood of successful packet transmission expressed
as a number between 0 and 255, where 255 means 100 percent
reliability and 0 means no reliability.
loading— Effective bandwidth of the route expressed as a number
•
from 0 to 255 (255 is 100 percent loading).
mtu—Minimum maximum transmission unit (MTU) size of the
•
route in bytes in the range 0 to 4294967295.
Set the OSPF external metric type for redistributed routes.
Set the multi-exit discriminator (MED) value on prefixes advertised to
external BGP neighbor to match the IGP metric of the next hop.
Set the BGP weight for the routing table. The value can be from 1 to
65535.
Return to privileged EXEC mode.
Display all route maps configured or only the one specified to verify
configuration.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Enter router configuration mode.
Chapter 1
Configuring IP Unicast Routing
OL-25303-03
Advertisement
Table of Contents
Troubleshooting
