Cisco IE 3000 Software Configuration Manual page 153
Hide thumbs
Also See for IE 3000:
- Hardware installation manual (186 pages) ,
- Getting started manual (32 pages) ,
- Software configuration manual (874 pages)
Table of Contents
Advertisement
Chapter 7
Administering the Switch
•
You enable unicast MAC address filtering and configure the switch to drop packets with a specific
address by specifying the source or destination unicast MAC address and the VLAN from which it is
received.
Beginning in privileged EXEC mode, follow these steps to configure the switch to drop a source or
destination unicast static address:
Command
Step 1
configure terminal
Step 2
mac address-table static mac-addr
vlan vlan-id drop
Step 3
end
Step 4
show mac address-table static
Step 5
copy running-config startup-config
To disable unicast MAC address filtering, use the no mac address-table static mac-addr vlan vlan-id
global configuration command.
This example shows how to enable unicast MAC address filtering and to configure the switch to drop
packets that have a source or destination address of c2f3.220a.12f4. When a packet is received in
VLAN 4 with this MAC address as its source or destination, the packet is dropped:
Switch(config)# mac
OL-13018-01
If you add a unicast MAC address as a static address and configure unicast MAC address filtering,
the switch either adds the MAC address as a static address or drops packets with that MAC address,
depending on which command was entered last. The second command that you entered overrides the
first command.
For example, if you enter the mac address-table static mac-addr vlan vlan-id interface
interface-id global configuration command followed by the mac address-table static mac-addr
vlan vlan-id drop command, the switch drops packets with the specified MAC address as a source
or destination.
If you enter the mac address-table static mac-addr vlan vlan-id drop global configuration
command followed by the mac address-table static mac-addr vlan vlan-id interface interface-id
command, the switch adds the MAC address as a static address.
Purpose
Enter global configuration mode.
Enable unicast MAC address filtering and configure the switch to drop a
packet with the specified source or destination unicast static address.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
a
ddress-table static c2f3.220a.12f4 vlan 4 drop
For mac-addr, specify a source or destination unicast MAC address.
•
Packets with this MAC address are dropped.
For vlan-id, specify the VLAN for which the packet with the
•
specified MAC address is received. Valid VLAN IDs are 1 to 4094.
Cisco IE 3000 Switch Software Configuration Guide
Managing the MAC Address Table
7-25
Advertisement
Chapters
Table of Contents
Troubleshooting
