Default Vtp Configuration - Cisco IE 3000 Software Configuration Manual
Hide thumbs
Also See for IE 3000:
- Hardware installation manual (186 pages) ,
- Getting started manual (32 pages) ,
- Software configuration manual (874 pages)
Table of Contents
Advertisement
Configuring VTP
See the
you enable it. VTP pruning does not prune traffic from VLANs that are pruning-ineligible. VLAN 1 and
VLANs 1002 to 1005 are always pruning-ineligible; traffic from these VLANs cannot be pruned.
Extended-range VLANs (VLAN IDs higher than 1005) are also pruning-ineligible.
VTP pruning is not designed to function in VTP transparent mode. If one or more switches in the
network are in VTP transparent mode, you should do one of these:
•
•
To configure VTP pruning on an interface, use the switchport trunk pruning vlan interface
configuration command (see the
pruning operates when an interface is trunking. You can set VLAN pruning-eligibility, whether or not
VTP pruning is enabled for the VTP domain, whether or not any given VLAN exists, and whether or not
the interface is currently trunking.
Configuring VTP
These sections contain this configuration information:
•
•
•
•
•
•
•
•
•
Default VTP Configuration
Table 14-2
Table 14-2
Feature
VTP domain name
VTP mode
VTP version
VTP password
VTP pruning
Cisco IE 3000 Switch Software Configuration Guide
14-6
"Enabling VTP Pruning" section on page
Turn off VTP pruning in the entire network.
Turn off VTP pruning by making all VLANs on the trunk of the switch upstream to the VTP
transparent switch pruning ineligible.
Default VTP Configuration, page 14-6
VTP Configuration Options, page 14-7
VTP Configuration Guidelines, page 14-8
Configuring a VTP Server, page 14-9
Configuring a VTP Client, page 14-11
Disabling VTP (VTP Transparent Mode), page 14-12
Enabling VTP Version 2, page 14-13
Enabling VTP Pruning, page 14-14
Adding a VTP Client Switch to a VTP Domain, page 14-14
shows the default VTP configuration.
Default VTP Configuration
14-14. VTP pruning takes effect several seconds after
"Changing the Pruning-Eligible List" section on page
Default Setting
Null.
Server.
Version 1 (Version 2 is disabled).
None.
Disabled.
Chapter 14
Configuring VTP
13-19). VTP
OL-13018-01
Advertisement
Chapters
Table of Contents
Troubleshooting
