Understanding Interface Types - Cisco IE 3000 Software Configuration Manual

Hide thumbs Also See for IE 3000:

Table of Contents

Configuring Interface Characteristics

This chapter defines the types of interfaces on the IE 3000 switch and describes how to configure them.

The chapter consists of these sections:

For complete syntax and usage information for the commands used in this chapter, see the switch

command reference for this release and the Cisco IOS Interface Command Reference, Release 12.2 from

the Cisco.com page under Documentation > Cisco IOS Software > 12.2 Mainline > Command

Understanding Interface Types

This section describes the different types of interfaces supported by the switch with references to

chapters that contain more detailed information about configuring these interface types. The rest of the

chapter describes configuration procedures for physical interface characteristics.

These sections describe the interface types:

Understanding Interface Types, page 11-1

Using Interface Configuration Mode, page 11-4

Configuring Ethernet Interfaces, page 11-10

Configuring the System MTU, page 11-17

Monitoring and Maintaining the Interfaces, page 11-19

Port-Based VLANs, page 11-2

Switch Ports, page 11-2

EtherChannel Port Groups, page 11-3

Dual-Purpose Uplink Ports, page 11-4

Connecting Interfaces, page 11-4

C H A P T E R

Cisco IE 3000 Switch Software Configuration Guide

Table of Contents