Configuring Snmp; Default Snmp Configuration; Snmp Configuration Guidelines - Cisco IE 3000 Software Configuration Manual

Hide thumbs Also See for IE 3000:

Table of Contents

Configuring SNMP

These sections contain this configuration information:

SNMP trap receiver

SNMP version

SNMPv3 authentication

SNMP notification type

1. This is the default when the switch starts and the startup configuration does not have any snmp-server global configuration

If the switch starts and the switch startup configuration has at least one snmp-server global

configuration command, the SNMP agent is enabled.

An SNMP group is a table that maps SNMP users to SNMP views. An SNMP user is a member of an

SNMP group. An SNMP host is the recipient of an SNMP trap operation. An SNMP engine ID is a name

for the local or remote SNMP engine.

Cisco IE 3000 Switch Software Configuration Guide

Default SNMP Configuration, page 29-6

SNMP Configuration Guidelines, page 29-6

Disabling the SNMP Agent, page 29-7

Configuring Community Strings, page 29-8

Configuring SNMP Groups and Users, page 29-9

Configuring SNMP Notifications, page 29-11

Setting the Agent Contact and Location Information, page 29-15

Limiting TFTP Servers Used Through SNMP, page 29-15

SNMP Examples, page 29-16

shows the default SNMP configuration.

Default SNMP Configuration

Default Setting

None configured.

None enabled except the trap for TCP connections (tty).

If no version keyword is present, the default is Version 1.

If no keyword is entered, the default is the noauth (noAuthNoPriv)

security level.

If no type is specified, all notifications are sent.

Configuring SNMP

Table of Contents