Cisco IE 3000 Software Configuration Manual page 535

Hide thumbs Also See for IE 3000:

Table of Contents

Configuring SNMP

Though visible in the command-line help strings, the cpu [threshold], insertion, and removal keywords

are not supported. To enable the sending of SNMP inform notifications, use the snmp-server enable

traps global configuration command combined with the snmp-server host host-addr informs global

configuration command.

You can use the snmp-server host global configuration command to a specific host to receive the

notification types listed in

Beginning in privileged EXEC mode, follow these steps to configure the switch to send traps or informs

configure terminal

snmp-server engineID remote

ip-address engineid-string

snmp-server user username

groupname {remote host [udp-port

port]} {v1 [access access-list] | v2c

[access access-list] | v3 [encrypted]

[access access-list] [auth {md5 | sha}

auth-password]}

snmp-server group groupname {v1 |

v2c | v3 {auth | noauth | priv}} [read

readview] [write writeview] [notify

notifyview] [access access-list]

Enter global configuration mode.

Specify the engine ID for the remote host.

Configure an SNMP user to be associated with the remote host created in

You cannot configure a remote user for an address without first

configuring the engine ID for the remote host. Otherwise, you

receive an error message, and the command is not executed.

Configure an SNMP group.

Cisco IE 3000 Switch Software Configuration Guide

Configuring SNMP

Chapters

Table of Contents