Appendix B
Catalyst 3750-X and 3560-X Switch Debug Commands
debug platform messaging application
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Related Commands
OL-21522-02
Downloaded from
www.Manualslib.com
Use the debug platform messaging application privileged EXEC command to enable debugging of
application messaging activity. Use the no form of this command to disable debugging.
debug platform messaging application {all | badpak | cleanup | events | memerr | messages |
stackchg | usererr}
no debug platform messaging application {all | badpak | cleanup | events | memerr | messages
| stackchg | usererr}
all
Display all application-messaging debug messages.
badpak
Display bad-packet debug messages.
cleanup
Display clean-up debug messages.
events
Display event debug messages.
memerr
Display memory-error debug messages.
messages
Display application-messaging debug messages.
stackchg
Display stack-change debug messages.
This keyword is supported only on Catalyst 3750-X switches.
usererr
Display user-error debug messages.
Debugging is disabled.
Privileged EXEC
Release
12.2(53)SE2
The undebug platform messaging application command is the same as the no debug platform
messaging application command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable e
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Command
show debugging
manuals search engine
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Catalyst 3750-X and 3560-X Switch Command Reference
debug platform messaging application
B-61