Cisco CVR100W Administration Manual page 32
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Network
Configuring LAN Settings
STEP 4
STEP 5
STEP 6
Cisco CVR100W Wireless-N 300M Router Administration Guide
DHCP Relay
If you select Enable, enter the following information:
Starting IP Address
Maximum Number of
DHCP Users
IP Address Range
Client Lease time
Static DNS 1
Static DNS 2
Static DNS 3
WINS
If you select DHCP Relay, enter the address of the relay gateway in the Remote
DHCP Server field. The relay gateway transmits DHCP messages between
multiple subnets.
Click Save.
Click this radio button to select DHCP Relay to
configure the CVR100W to act as a relayer of
IP addresses by a different DHCP server.
Enter the first address in the IP address pool. Any new
DHCP client joining the LAN is assigned an IP address
in this range (the ending IP address in the pool is
determined by the value you enter in the Maximum
Number of DHCP Users field).
Enter the maximum number of DHCP clients.
(Read-only) Displays the range of IP addresses
available to the DHCP clients.
Enter the duration (in hours) for which IP addresses are
leased to clients.
Enter the IP address of the primary DNS server.
Enter the IP address of the secondary DNS server.
Enter the IP address of the tertiary DNS server.
Enter the IP address of the primary WINS server.
2
30
Advertisement
Table of Contents
