Cisco CVR100W Administration Manual page 64
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Wireless Network
Configuring Advanced Wireless Settings
Cisco CVR100W Wireless-N 300M Router Administration Guide
Frame Burst
WMM No
Acknowledgement
Basic Rate
Check Enable to enable this feature to provide your
wireless networks with greater performance,
depending on the manufacturer of your wireless
products. If you are not sure how to use this option,
keep the default (enabled).
Check Enable to enable this feature. Enabling WMM No
Acknowledgement can result in more efficient
throughput, but higher error rates in a noisy Radio
Frequency (RF) environment. Default setting is
disabled
The Basic Rate setting is not the rate of transmission
but a series of rates at which the Services Ready
Platform can transmit.
The CVR100W advertises its basic rate to the other
wireless devices in your network, so they know which
rates will be used.
The Services Ready Platform will also advertise that it
will automatically select the best rate for transmission.
The default setting is Default, when the CVR100W can
transmit at all standard wireless rates (1-2 Mbps, 5.5
Mbps, 11 Mbps, 18 Mbps, 24 Mbps, and so on). In
addition to B and G speeds, the CVR100W supports
N speeds.
Other options are 1-2 Mbps, for use with older wireless
technology, and All, when the CVR100W can transmit
at all wireless rates.
The Basic Rate is not the actual rate of data
transmission. If you want to specify the CVR100W's
rate of data transmission, configure the Transmission
Rate setting.
3
62
Advertisement
Table of Contents
