Cisco CVR100W Administration Manual page 65
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Wireless Network
Configuring Advanced Wireless Settings
Cisco CVR100W Wireless-N 300M Router Administration Guide
Transmission Rate
N Transmission Rate
CTS Protection Mode
Beacon Interval
The rate of data transmission should be set depending
on the speed of your wireless network.
You can select from a range of transmission speeds, or
you can select Auto to have the CVR100W
automatically use the fastest possible data rate and
enable the Auto-Fallback feature.
Auto-Fallback will negotiate the best possible
connection speed between the CVR100W and a
wireless client. The default is Auto.
The rate of data transmission should be set depending
on the speed of your Wireless-N networking.
You can select from a range of transmission speeds, or
you can select Auto to have the CVR100W
automatically use the fastest possible data rate and
enable the Auto-Fallback feature.
Auto-Fallback will negotiate the best possible
connection speed between the CVR100W and a
wireless client. The default is Auto.
The CVR100W will automatically use CTS (Clear-To-
Send) Protection Mode when your Wireless-N and
Wireless-G devices are experiencing severe problems
and are not able to transmit to the CVR100W in an
environment with heavy 802. 1 1b traffic.
This function boosts the CVR100W's ability to catch all
Wireless-N and Wireless-G transmissions but will
severely decrease performance. The default is Auto.
The Beacon Interval value indicates the frequency
interval of the beacon. A beacon is a packet broadcast
by the CVR100W to synchronize the wireless network.
Enter a value between 40 and 3500 milliseconds. The
default value is 100.
3
63
Advertisement
Table of Contents
