Configuring Sleep-Mode Light Control; Configuring System Time - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Administering Your CVR100W
Configuring Sleep-Mode Light Control
Configuring Sleep-Mode Light Control
NOTE
STEP 1
STEP 2
STEP 3
Configuring System Time
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco CVR100W Wireless-N 300M Router Administration Guide
The Sleep-Mode Light Control feature turns on or turns off all lights of the
CVR100W. You can enable this feature by pressing the Sleep-Mode Light Control
button on the front panel or from the Device Manager.
Enabling this feature will not affect the normal operation of the CVR100W.
To enable Sleep-Mode Light Control from the Device Manager:
Choose Administration > Sleep-Mode Light Control.
In the Sleep-Mode Light Control field, check Enable to enable Sleep-Mode Light
Control on the CVR100W.
Click Save.
You can configure your time zone, whether or not to adjust for Daylight Savings
Time, and with which Network Time Protocol (NTP) server to synchronize the date
and time. The CVR100W then gets its date and time information from the NTP
server.
To configure NTP and time settings:
Choose Administration > Time Settings. The current time is displayed.
Specify the time zone from the Time zone drop-down menu.
In the Adjust for Daylight Savings Time field, check the box to adjust the time for
Daylight Savings Time.
In the Set Date and Time field, choose how to set the date and time.
•
Auto: Click this radio button to automatically synchronize the date and time
with the specified NTP server.
•
Manual: Click this radio button to manually set the date and time.
If you choose Auto to set the system time, enter the following information in the
NTP Server field:
7
94
Advertisement
Table of Contents
