Viewing Port Statistics - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Viewing CVR100W Status
Viewing Port Statistics
STEP 3
Viewing Port Statistics
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco CVR100W Wireless-N 300M Router Administration Guide
Static DHCP Binding
Click Save to apply your settings.
The Port Statistics page displays port statistics.
To view port statistics:
Choose Status > Port Statistics.
From the Refresh Rate drop-down menu, choose a refresh rate. This causes the
page to re-read the statistics from the CVR100W and refresh the page.
(Optional) By default, byte data is displayed in bytes and other numerical data is
displayed in long form. To show the bytes in kilobytes (KB) and the numerical data
in rounded up from, check Show Simplified Statistic Data and click Save.
To reset the port statistics counters, click Clear Counters.
The Port Statistics table displays the data transfer statistics for the WAN, LAN,
and WLAN ports:
Interface
Packet
Byte
Error
Dropped
Multicast
Check to enable Static DHCP Binding for this device.
The CVR100W will always assign this IP address to
the device.
Name of the network interface.
Number of the received and sent packets through the
interface.
Number of the received and sent bytes of information
per second.
Number of the received and sent packet errors.
Number of the received and sent packets that were
dropped.
Number of multicast packets sent over this radio.
8
110
Advertisement
Table of Contents
