Cloning The Mac Address - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Network
Configuring WAN Settings
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
Cisco CVR100W Wireless-N 300M Router Administration Guide
Click Save.
Cloning the MAC Address
Sometimes, you may need to set the MAC address of the CVR100W's WAN port to
be the same MAC address as your PC's or some other MAC address. This is called
MAC address cloning.
For example, some ISP's register your computer's NIC card MAC address when
the service is first installed. When you place a router behind the cable modem or
DSL modem, the MAC address from the CVR100W's WAN port is not recognized
by the ISP.
In this case, to configure your CVR100W to be recognized by the ISP, clone the
MAC address of the WAN port to be the same as your computer's MAC address.
To configure a MAC address clone:
Choose Networking > WAN > MAC Address Clone.
In the MAC Address Clone field, check Enable to enable MAC address cloning.
Set the MAC address of the CVR100W's WAN port, do one of the following:
•
To set the MAC address of the WAN port to your PC's MAC address,
click Clone My PC's MAC.
•
To specify a different MAC address, enter it in the MAC Address field.
Click Save.
2
27
Advertisement
Table of Contents
