Configuring Qos Port-Based Settings - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Quality of Service (QoS)
Configuring QoS Port-Based Settings
Configuring QoS Port-Based Settings
STEP 1
STEP 2
STEP 3
Cisco CVR100W Wireless-N 300M Router Administration Guide
You can configure QoS settings for each LAN port on the CVR100W. The
CVR100W supports 4 priority queues that allow for traffic prioritization per
physical switch port.
To configure QoS settings for the LAN ports:
Choose QoS > QoS Port-Based Settings.
For each port in the QoS Port-Based Settings table, enter the following
information:
Trust Mode
Default Traffic
Forwarding Queue
for Untrusted
Devices
Click Save.
To restore the default port-based QoS settings, click Restore Default. Then, click
Save.
Choose one of the following options from the drop-
down menu:
Port: This setting enables the port based on QoS. You
can then set the traffic priority for a particular port. The
traffic queue priority starts at the lowest priority of 1
and ends with the highest priority of 4.
DSCP: Differentiated Services Code Point (DSCP).
Enabling this feature prioritizes the network traffic
across the LAN based on the DSCP queue mapping on
the DSCP Settings page.
CoS: Class of Service (CoS). Enabling this feature
prioritizes the network traffic across the LAN based on
the CoS queue mapping on the CoS Settings page.
Choose a priority level for outbound traffic (1 to 4).
6
88
Advertisement
Table of Contents
