Configuring Optional Settings - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Network
Configuring WAN Settings
STEP 4
STEP 5
STEP 1
STEP 2
Cisco CVR100W Wireless-N 300M Router Administration Guide
Internet IP Address
Subnet Mask
Default Gateway
Static DNS 1
Static DNS 2
(Optional) To configure the optional settings, see
Click Save.
Configuring Optional Settings
To configure optional settings:
Choose Networking > WAN > Internet Setup.
In the Optional Settings area, configure the following settings:
Host Name
Domain Name
MTU
MTU Size
Enter the IP address of the WAN port.
Enter subnet mask of the WAN port.
Enter the IP address of the default gateway.
Enter the IP address of the primary DNS server.
Enter the IP address of the secondary DNS server.
Enter the host name of the CVR100W.
Enter the domain name for your network.
The Maximum Transmit Unit (MTU) is the size of the
largest packet that can be sent over the network.
The standard MTU value for Ethernet networks is
usually 1500 bytes. For PPPoE connections, the value
is 1492 bytes.
Unless a change is required by your ISP, Cisco
recommends that you choose Auto. The default MTU
size is 1500 bytes.
If your ISP requires a custom MTU setting, choose
Manual and enter the MTU size.
Enter the MTU size.
Configuring Optional
2
Settings.
26
Advertisement
Table of Contents
