Configuring And Enabling The Cross-Check Function (Ce-B) - Cisco 1941W Configuration Manual
Cisco 3900 series, cisco 2900 series,
cisco 1900 series
Hide thumbs
Also See for 1941W:
- Hardware installation manual (102 pages) ,
- Installing and upgrading (24 pages)
Table of Contents
Advertisement
Connectivity Fault Management (CFM) over EVC BD
Command
Step 7
exit
Example:
Router(config)# exit
Step 8
ethernet cfm mep crosscheck {enable |
disable} domain domain-name] {port |
vlan {vlan-id | vlan-id - vlan-id | ,
vlan-id - vlan-id}}
Example:
Router# ethernet cfm mep crosscheck
enable domain cust4 vlan 100
Configuring and Enabling the Cross-Check Function (CE-B)
SUMMARY STEPS
enable
Step 1
configure terminal
Step 2
ethernet cfm domain domain-name level level-id
Step 3
mep mpid mpid
Step 4
exit
Step 5
ethernet cfm mep crosscheck start-delay delay
Step 6
exit
Step 7
ethernet cfm mep crosscheck {enable | disable} domain domain-name] {port | vlan {vlan-id | vlan-id
Step 8
- vlan-id | , vlan-id - vlan-id}}
DETAILED STEPS
Command
Step 1
enable
Example:
Router>enable
Step 2
configure terminal
Example:
Router# configure terminal
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
80
Chapter
Configuring Ethernet Virtual Connection Bridge Domain
Purpose
Returns the device to privileged EXEC mode.
Enables cross-checking between the list of configured
remote MEPs of a domain and MEPs learned through
CCMs.
Purpose
Enables the privileged EXEC mode.
Enter your password when prompted.
Enters the global configuration mode.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
