Reserved-Only - Cisco catalyst 3750 Command Reference Manual

Hide thumbs Also See for catalyst 3750:

Table of Contents

reserved-only

Use the reserved-only DHCP pool configuration mode command to allocate only reserved addresses in

the Dynamic Host Configuration Protocol (DHCP) address pool. Use the no form of the command to

return to the default.

Syntax Description

This command has no arguments or keywords.

The default is to not restrict pool addresses

Command Modes

Privileged EXEC

Command History

Usage Guidelines

Entering the reserved-only command restricts assignments from the DHCP pool to preconfigured

reservations. Unreserved addresses that are part of the network or on pool ranges are not offered to the

client, and other clients are not served by the pool.

By entering this command, users can configure a group of switches with DHCP pools that share a

common IP subnet and that ignore requests from clients of other switches.

To access DHCP pool configuration mode, enter the ip dhcp pool name global configuration command.

This example shows how to configure the DHCP pool to allocate only reserved addresses:

Switch# config t

Enter configuration commands, one per line.

Switch(config)# ip dhcp pool test1

Switch(dhcp-config)# reserved-only

You can verify your settings by entering the show ip dhcp pool privileged EXEC command.

Catalyst 3750 Switch Command Reference

reserved-only

no reserved-only

Modification

This command was introduced.

Catalyst 3750 Switch Cisco IOS Commands

End with CNTL/Z.

Show Quick Links

Table of Contents