Shutdown Vlan - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
shutdown vlan
shutdown vlan
Use the shutdown vlan global configuration command to shut down (suspend) local traffic on the
specified VLAN. Use the no form of this command to restart local traffic on the VLAN.
Syntax Description
vlan-id
Defaults
No default is defined.
Command Modes
Global configuration
Command History
Release
12.2(25)FX
Usage Guidelines
The shutdown vlan command does not change the VLAN information in the VTP database. The
command shuts down local traffic, but the switch still advertises VTP information.
Examples
This example shows how to shut down traffic on VLAN 2:
Switch(config)# shutdown vlan 2
You can verify your setting by entering the show vlan privileged EXEC command.
Related Commands
Command
shutdown
(config-vlan mode)
vlan database
Catalyst 2960 Switch Command Reference
2-408
shutdown vlan vlan-id
no shutdown vlan vlan-id
ID of the VLAN to be locally shut down. The range is 2 to 1001. VLANs defined as
default VLANs under the VLAN Trunking Protocol (VTP), as well as
extended-range VLANs (greater than 1005) cannot be shut down. The default
VLANs are 1 and 1002 to 1005.
Modification
This command was introduced.
Description
Shuts down local traffic on the VLAN when in config-VLAN mode (accessed
by the vlan vlan-id global configuration command).
Enters VLAN configuration mode.
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
78-16882-01
Hide quick links:
Advertisement
Table of Contents
