Chapter 27 Configuring Rmon; Understanding Rmon - Cisco IE 3000 Software Configuration Manual

Hide thumbs Also See for IE 3000:

Table of Contents

Configuring RMON

This chapter describes how to configure Remote Network Monitoring (RMON) on the IE 3000 switch.

RMON is a standard monitoring specification that defines a set of statistics and functions that can be

exchanged between RMON-compliant console systems and network probes. RMON provides you with

comprehensive network-fault diagnosis, planning, and performance-tuning information.

For complete syntax and usage information for the commands used in this chapter, see the "System

Management Commands" section in the Cisco IOS Configuration Fundamentals Command Reference,

Release 12.2 from the Cisco.com page under Documentation > Cisco IOS Software > 12.2 Mainline

> Command References.

This chapter consists of these sections:

RMON is an Internet Engineering Task Force (IETF) standard monitoring specification that allows

various network agents and console systems to exchange network monitoring data. You can use the

RMON feature with the Simple Network Management Protocol (SNMP) agent in the switch to monitor

all the traffic flowing among switches on all connected LAN segments as shown in

Understanding RMON, page 27-1

Configuring RMON, page 27-2

Displaying RMON Status, page 27-6

C H A P T E R

Cisco IE 3000 Switch Software Configuration Guide

Chapters

Table of Contents