Using Time Ranges With Acls - Cisco IE 3000 Software Configuration Manual
Hide thumbs
Also See for IE 3000:
- Hardware installation manual (186 pages) ,
- Getting started manual (32 pages) ,
- Software configuration manual (874 pages)
Table of Contents
Advertisement
Configuring IPv4 ACLs
Using Time Ranges with ACLs
You can selectively apply extended ACLs based on the time of day and the week by using the time-range
global configuration command. First, define a time-range name and set the times and the dates or the
days of the week in the time range. Then enter the time-range name when applying an ACL to set
restrictions to the access list. You can use the time range to define when the permit or deny statements
in the ACL are in effect, for example, during a specified time period or on specified days of the week.
The time-range keyword and argument are referenced in the named and numbered extended ACL task
tables in the previous sections, the
and the
Time-based access lists trigger CPU activity because the new configuration of the access list must be
merged with other features and the combined configuration loaded into the TCAM. For this reason, you
should be careful not to have several access lists configured to take affect in close succession (within a
small number of minutes of each other.)
Note
The time range relies on the switch system clock; therefore, you need a reliable clock source. We
recommend that you use Network Time Protocol (NTP) to synchronize the switch clock. For more
information, see the
Beginning in privileged EXEC mode, follow these steps to configure a time-range parameter for an ACL:
Command
Step 1
configure terminal
Step 2
time-range time-range-name
Step 3
absolute [start time date]
[end time date]
or
periodic day-of-the-week hh:mm to
[day-of-the-week] hh:mm
or
periodic {weekdays | weekend | daily}
hh:mm to hh:mm
Step 4
end
Step 5
show time-range
Step 6
copy running-config startup-config
Repeat the steps if you have multiple items that you want in effect at different times.
To remove a configured time-range limitation, use the no time-range time-range-name global
configuration command.
This example shows how to configure time ranges for workhours and to configure January 1, 2006, as a
company holiday and to verify your configuration.
Switch(config)# time-range workhours
Switch(config-time-range)# periodic weekdays 8:00 to 12:00
Switch(config-time-range)# periodic weekdays 13:00 to 17:00
Switch(config-time-range)# exit
Cisco IE 3000 Switch Software Configuration Guide
30-14
"Creating Named Standard and Extended ACLs" section on page
"Managing the System Time and Date" section on page
Purpose
Enter global configuration mode.
Assign a meaningful name (for example, workhours) to the time range to
be created, and enter time-range configuration mode. The name cannot
contain a space or quotation mark and must begin with a letter.
Specify when the function it will be applied to is operational.
•
•
See the example configurations.
Return to privileged EXEC mode.
Verify the time-range configuration.
(Optional) Save your entries in the configuration file.
Chapter 30
"Creating Standard and Extended IPv4 ACLs" section on page
You can use only one absolute statement in the time range. If you
configure more than one absolute statement, only the one configured
last is executed.
You can enter multiple periodic statements. For example, you could
configure different hours for weekdays and weekends.
Configuring Network Security with ACLs
30-12.
7-1.
OL-13018-01
30-5,
Advertisement
Chapters
Table of Contents
Troubleshooting
