Example Of V Memory And I/O Address Area - Siemens SIMATIC S7 System Manual

Hide thumbs Also See for SIMATIC S7:

Table of Contents

In the examples above, the CPU 315-2 DP is the configured DP master. Depending on the

master CPU type, the EM DP01 "Properties" can appear slightly different than those shown

Example of V memory and I/O address area

The following figure shows an example of the V memory in the S7-200 SMART CPU and the

I/O address area of an S7-300 PROFIBUS DP master:

In this example, the DP master has defined an I/O configuration consisting of two slots and a

V memory offset of 1000. The example configures the first slot as 32 bytes in and out and

the second slot as 8 bytes in and out. The output and input buffers in the S7-200 SMART

CPU are both 40 bytes (32 + 8). The output data (from the DP master) buffer starts at

V1000; the input data (to the DP master) buffer immediately follows the output buffer and

begins at V1040.

S7-200 SMART

System Manual, V2.3, 07/2017, A5E03822230-AF

Communication

8.5 PROFIBUS

Show Quick Links

Table of Contents

Simatic s7-200 smart