Configuring The Devices - Siemens SIMATIC S7 System Manual

Hide thumbs Also See for SIMATIC S7:

Table of Contents

103BCommunication

10.2 PROFINET

Follow the steps below to create the hardware connection between a programming device

1. Install the CPU (Page 44).

2. Plug the Ethernet cable into the PROFINET port shown below.

3. Connect the Ethernet cable to the programming device.

An optional strain relief is available to strengthen the PROFINET connection.

Configuring the devices

If you have already created a project with a CPU, open your project in the TIA Portal.

If not, create a project and insert a CPU (Page 110) into the rack. In the project below, a

CPU is shown in the "Device View".

PROFINET port

S7-1200 Programmable controller

System Manual, 11/2011, A5E02486680-05

Show Quick Links

Table of Contents

Simatic s7-1200