Cpu Operator Panel For The Online Cpu - Siemens SIMATIC S7 System Manual

Hide thumbs Also See for SIMATIC S7:

Table of Contents

To reset a CPU to its factory settings, follow these steps:

1. Open the Online and Diagnostics view of the CPU.

2. Select "Reset to factory settings" from the "Functions" folder.

3. Select the "Keep IP address" check box if you want to retain the IP address or the "Reset

4. Click the "Reset" button.

5. Acknowledge the confirmation prompt with "OK".

The module is switched to STOP mode if necessary, and it is reset to the factory settings:

● The work memory and internal load memory and all operand areas are cleared.

● All parameters are reset to their defaults.

● The diagnostics buffer is cleared.

● The time of day is reset.

● The IP address is retained or deleted based on the setting you made. (The MAC address

CPU operator panel for the online CPU

Use the CPU operating panel of the Online Tools task card to change the operating mode of

an online CPU. The Online Tools task card is accessible whenever the CPU is online.

S7-1200 Programmable controller

System Manual, 11/2011, A5E02486680-05

IP address" check box if you want to delete the IP address.

is fixed and is never changed.)

The "CPU operator panel" displays the operating mode (STOP or

RUN) of the online CPU. The panel also shows whether the CPU has

an error or if values are being forced.

107BOnline and diagnostic tools

14.6 CPU operator panel for the online CPU

Show Quick Links

Table of Contents

Simatic s7-1200