Understanding Cisco Ip Phone Support; Cisco Ip Phone Connections - Cisco 7609 Configuration Manual
Cisco ios software configuration guide—12.1e
Hide thumbs
Also See for 7609:
- Installing (22 pages) ,
- Datasheet (5 pages) ,
- Frequently asked questions (5 pages)
Table of Contents
Advertisement
Configuring Cisco IP Phone Support
This chapter describes how to configure support for Cisco IP Phones on the Cisco 7600 series routers.
Release 12.1(13)E and later releases support Cisco IP Phones.
Note
For complete syntax and usage information for the commands used in this chapter, refer to the
Cisco 7600 Series Router Cisco IOS Command Reference publication for this release.
This chapter consists of these sections:
•
•
•
•
Understanding
These sections describe Cisco IP Phone support:
•
•
•
•
Cisco IP Phone Connections
The Cisco IP Phone contains an integrated 3-port 10/100 switch. The ports are dedicated connections to
these devices:
•
•
•
Figure 11-1
78-14064-04
Understanding Cisco IP Phone Support, page 11-1
Default Cisco IP Phone Support Configuration, page 11-4
Cisco IP Phone Support Configuration Guidelines and Restrictions, page 11-4
Configuring Cisco IP Phone Support, page 11-5
Cisco IP Phone Support
Cisco IP Phone Connections, page 11-1
Cisco IP Phone Voice Traffic, page 11-2
Cisco IP Phone Data Traffic, page 11-3
Cisco IP Phone Power Configurations, page 11-3
Port 1 connects to the router.
Port 2 is an internal 10/100 interface that carries the Cisco IP Phone traffic.
Port 3 connects to a PC or other device.
shows a Cisco IP Phone connected between a router and a PC.
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
C H A P T E R
11
11-1
Advertisement
Table of Contents
Troubleshooting
