Understanding How Power Management Works - Cisco 7609 Configuration Manual
Cisco ios software configuration guide—12.1e
Hide thumbs
Also See for 7609:
- Installing (22 pages) ,
- Datasheet (5 pages) ,
- Frequently asked questions (5 pages)
Table of Contents
Advertisement
Power Management and Environmental
Monitoring
This chapter describes the power management and environmental monitoring features in the Cisco 7600
series routers.
Note
For complete syntax and usage information for the commands used in this chapter, refer to the
Cisco 7600 Series Router Cisco IOS Command Reference publication.
This chapter consists of these sections:
•
•
Understanding How Power Management Works
These sections describe power management in the Cisco 7600 series routers:
•
•
•
•
•
Note
In systems with redundant power supplies, both power supplies must be of the same wattage. The
Cisco 7600 series routers allow you to mix AC-input and DC-input power supplies in the same chassis.
For detailed information on supported power supply configurations, refer to the Cisco 7609 Router
Installation Guide and Cisco 7603 Router Installation Guide .
The modules have different power requirements, and certain configurations require more power than a
single power supply can provide. Although the power management feature allows you to power all
installed modules with two power supplies, redundancy is not supported in this configuration. Redundant
and nonredundant power configurations are discussed in the following sections.
To determine the power requirements for your system, see the
Requirements" section on page
78-14064-04
Understanding How Power Management Works, page 38-1
Understanding How Environmental Monitoring Works, page 38-4
Enabling or Disabling Power Redundancy, page 38-2
Using the CLI to Power Modules Off and On, page 38-3
Using the CLI to View System Power Status, page 38-3
Using the CLI to Power Cycle Modules, page 38-4
Determining System Power Requirements, page 38-4
38-4.
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
C H A P T E R
"Determining System Power
38
38-1
Advertisement
Table of Contents
Troubleshooting
