Performing History Substitution - Cisco 7609 Configuration Manual
Cisco ios software configuration guide—12.1e
Hide thumbs
Also See for 7609:
- Installing (22 pages) ,
- Datasheet (5 pages) ,
- Frequently asked questions (5 pages)
Table of Contents
Advertisement
Chapter 2
Command-Line Interfaces
This example shows how to open a Telnet session to the router:
unix_host% telnet Router_1
Trying 172.20.52.40...
Connected to 172.20.52.40.
Escape character is '^]'.
User Access Verification
Password:
Router_1> enable
Password:
Router_1#
Performing Command Line Processing
Commands are not case sensitive. You can abbreviate commands and parameters if the abbreviations
contain enough letters to be different from any other currently available commands or parameters. You
can scroll through the last 20 commands stored in the history buffer, and enter or edit the command at
the prompt.
Table 2-1
Keystrokes
Press Ctrl-B or
press the left arrow key
Press Ctrl-F or
press the right arrow key
Press Ctrl-A
Press Ctrl-E
Press Esc B
Press Esc F
1. The arrow keys function only on ANSI-compatible terminals such as VT100s.
Performing History Substitution
The history buffer stores the last 20 commands you entered. History substitution allows you to access
these commands without retyping them, by using special abbreviated commands.
history substitution commands.
78-14064-04
Table 2-1
lists the keyboard shortcuts for entering and editing commands.
Keyboard Shortcuts
Purpose
Moves the cursor back one character
1
Moves the cursor forward one character
1
Moves the cursor to the beginning of the command line
Moves the cursor to the end of the command line
Moves the cursor back one word
Moves the cursor forward one word
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
Performing Command Line Processing
Table 2-2
lists the
2-3
Advertisement
Table of Contents
Troubleshooting
