Product Overview
The Cisco IOS on the Cisco 7600 Series Router product supports the following hardware and software:
•
•
•
•
Refer to the Release Notes for Cisco IOS on Catalyst 6500 Series Switches and Cisco 7600 Series Router
publication for complete information about the chassis, modules, and software features supported by the
Cisco 7600 series routers:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/ol_2310.htm
The Cisco IOS on the Cisco 7600 Series Router product supports configuration using:
•
•
•
•
Configuring Embedded CiscoView Support
These sections describe the Embedded CiscoView support available with Release 12.1(20)E and later
releases:
•
•
•
78-14064-04
Supervisor Engine 2, Policy Feature Card 2 (PFC2), and Multilayer Switch Feature Card 2
(MSFC2); and in Catalyst 6500 series switches:
–
Switch Fabric Module
Fabric-enabled switching modules
–
–
Fabric-enabled switching modules with a distributed forwarding card (DFC)
Supervisor Engine 1, PFC, and MSFC or MSFC2
All Layer 2 and Layer 3 configuration from the same user interface
Except for VLANs, Layer 2 and Layer 3 configuration is stored in a standard IOS configuration file
CLI—See
Chapter 2, "Command-Line Interfaces"
SNMP—Refer to the IOS Configuration Fundamentals Configuration Guide and Command
Reference at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/index.htm
IOS web browser interface—Refer to "Using the Cisco Web Browser" in the IOS Configuration
Fundamentals Configuration Guide and Command Reference at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/index.htm
Embedded CiscoView—See the
Understanding Embedded CiscoView, page 1-2
Installing and Configuring Embedded CiscoView, page 1-2
Displaying Embedded CiscoView Information, page 1-3
"Configuring Embedded CiscoView Support" section on page
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
C H A P T E R
1
1-1.
1-1