Configuring The Igmp Query Interval; Enabling Igmp Fast-Leave Processing - Cisco 7609 Configuration Manual
Cisco ios software configuration guide—12.1e
Hide thumbs
Also See for 7609:
- Installing (22 pages) ,
- Datasheet (5 pages) ,
- Frequently asked questions (5 pages)
Table of Contents
Advertisement
Chapter 21
Configuring IGMP Snooping
Configuring the IGMP Query Interval
You can configure the interval for which the switch waits after sending a group-specific query to
determine if hosts are still interested in a specific multicast group.
Note
When both IGMP fast-leave processing and the IGMP query interval are configured, fast-leave
processing takes precedence.
To configure the interval for the IGMP queries sent by the switch, perform this task:
Command
Step 1
Router(config)# interface vlan vlan_ID
Step 2
Router(config-if)# ip igmp snooping
last-member-query-interval interval
Router(config-if)# no ip igmp snooping
last-member-query-interval
This example shows how to configure the IGMP query interval:
Router(config-if)# ip igmp snooping last-member-query-interval 200
Router(config-if)# exit
Router# show ip igmp interface vlan 200 | include last-member-query-interval
IGMP snooping last member query interval on this interface is 200 ms
Enabling IGMP Fast-Leave Processing
To enable IGMP fast-leave processing in a VLAN, perform this task:
Command
Step 1
Router(config)# interface vlan vlan_ID
Step 2
Router(config-if)# ip igmp snooping fast-leave
Router(config-if)# no ip igmp snooping fast-leave
This example shows how to enable IGMP fast-leave processing on the VLAN 200 interface and verify
the configuration:
Router# interface vlan 200
Router(config-if)# ip igmp snooping fast-leave
Configuring fast leave on vlan 200
Router(config-if)# end
Router# show ip igmp interface vlan 200 | include fast-leave
IGMP snooping fast-leave is enabled on this interface
Router(config-if)#
78-14064-04
Purpose
Selects a VLAN interface.
Configures the interval for the IGMP queries sent by the
switch. Default is 1 second. Valid range is 100 to 999
milliseconds.
Reverts to the default value.
Purpose
Selects a VLAN interface.
Enables IGMP fast-leave processing in the VLAN.
Disables IGMP fast-leave processing in the VLAN.
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
Configuring IGMP Snooping
21-11
Advertisement
Table of Contents
Troubleshooting
