Pfc Qos Feature Summary - Cisco 7609 Configuration Manual
Cisco ios software configuration guide—12.1e
Hide thumbs
Also See for 7609:
- Installing (22 pages) ,
- Datasheet (5 pages) ,
- Frequently asked questions (5 pages)
Table of Contents
Advertisement
Chapter 32
Configuring PFC QoS
PFC QoS Feature Summary
These sections summarize the PFC QoS features:
•
•
•
•
•
•
Ingress LAN Port Features
PFC QoS supports classification, marking, scheduling, and congestion avoidance using Layer 2 CoS
values at ingress LAN ports. Classification, marking, scheduling, and congestion avoidance at ingress
LAN ports do not use or set Layer 3 IP precedence or DSCP values. You can configure ingress LAN port
trust states that can be used by the PFC to set Layer 3 IP precedence or DSCP values and the Layer 2
CoS value. See
Ingress OSM Port Features
PFC QoS associates CoS zero with all traffic received through ingress OSM ports. You can configure
ingress OSM port trust states that can be used by the PFC to set Layer 3 IP precedence or DSCP values
and the Layer 2 CoS value. You can configure the trust state of each ingress OSM port as follows:
•
•
•
•
PFC QoS Features
On the PFC, PFC QoS supports ingress classification, marking, and policing using policy maps. You can
attach one policy map to an ingress port. Each policy map can contain multiple policy-map classes. You
can configure a separate policy-map class for each type of traffic received through the ingress port. See
the
Note
•
•
78-14064-04
Ingress LAN Port Features, page 32-11
Ingress OSM Port Features, page 32-11
PFC QoS Features, page 32-11
Egress LAN Port Features, page 32-12
Egress OSM Port Features, page 32-12
MSFC Features, page 32-12
Figure 32-3
and the
Untrusted (default)
Trust IP precedence
Trust DSCP
Trust CoS (CoS is always zero because the default port CoS is not configurable on OSM ports.)
"PFC Marking and Policing" section on page
You can globally disable marking and policing with the mls qos queueing-only command (see the
Enabling Queueing-Only Mode, page
You can disable marking and policing on a per-interface basis with the no mls qos interface
command (see the
"Enabling or Disabling PFC Features on an Interface" section on page
"Ingress LAN Port Features" section on page
32-16.
32-34).
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
Understanding How PFC QoS Works
32-12.
32-51.
32-11
Advertisement
Table of Contents
Troubleshooting
