Cisco 7609 Configuration Manual page 475
Cisco ios software configuration guide—12.1e
Hide thumbs
Also See for 7609:
- Installing (22 pages) ,
- Datasheet (5 pages) ,
- Frequently asked questions (5 pages)
Table of Contents
Advertisement
Chapter 32
Configuring PFC QoS
Setting the PFC QoS Statistics Data Export Field Delimiter
To set the PFC QoS statistics data export field delimiter, perform this task:
Command
Step 1
Router(config)# mls qos statistics-export
delimiter delimiter_character
Router(config)# no mls qos statistics-export
delimiter
Step 2
Router(config)# end
Step 3
Router# show mls qos statistics-export info
This example shows how to set the PFC QoS statistics data export field delimiter and verify the
configuration:
Router# configure terminal
Router(config)# mls qos statistics-export delimiter ,
Router(config)# end
Router# show mls qos statistics-export info
QoS Statistics Data Export Status and Configuration information
---------------------------------------------------------------
Export Status : enabled
Export Interval : 250 seconds
Export Delimiter : ,
Export Destination : 172.20.52.3, UDP port 514 Facility local6, Severity debug
QoS Statistics Data Export is enabled on following ports:
---------------------------------------------------------
FastEthernet5/24
QoS Statistics Data export is enabled on following shared aggregate policers:
-----------------------------------------------------------------------------
aggr1M
QoS Statistics Data Export is enabled on following class-maps:
---------------------------------------------------------------
class3
78-14064-04
Purpose
Sets the PFC QoS statistics data export field delimiter.
Reverts to the default PFC QoS statistics data export field
delimiter
Exits configuration mode.
Verifies the configuration.
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
Configuring PFC QoS
32-77
Advertisement
Table of Contents
Troubleshooting
