Verification Examples For Dynamic Qos Policies At The Session Level - Cisco 10000 Series Configuration Manual
Quality of service configuration guide
Hide thumbs
Also See for 10000 Series:
- Configuration manual (370 pages) ,
- Troubleshooting manual (70 pages) ,
- Installation manual (14 pages)
Table of Contents
Advertisement
Chapter 17
Configuring Dynamic Subscriber Services
Verification Examples for Dynamic QoS Policies at the Session Level
Example 17-19
example, the policy map named voice is attached to PVC 1/101 on the ATM interface 4/0/0.
Example 17-19 Verifying Dynamic Policies Using the show policy-map interface Command
Router# show policy-map interface atm 4/0/0
ATM4/0/0: PVC 1/101 -
Service-policy input: voice
Class-map: class-default (match-any)
Example 17-20
command displays the router's running-configuration file and displays the following types of
information:
•
•
•
•
•
•
•
Example 17-20 Verifying Dynamic Policies on the Router Using the show running-config Command
Router# show running-config
aaa new-model
!
aaa user profile TEST
!
aaa authentication ppp default group radius
aaa authorization network default group radius
!
aaa session-id common
ip subnet-zero
!
policy-map voice
class Class-Default
fair-queue
!
interface ATM4/0.1 point-to-point
pvc 1/101
dbs enable
encapsulation aal5mux ppp Virtual-Template1
!
interface Virtual-Template1
ip address negotiated
peer default ip address pool POOL1
ppp authentication chap
!
radius-server host 172.16.197.225 auth-port 1890 acct-port 1891
OL-7433-09
shows sample output for the show policy-map interface command on the router. In the
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
shows sample output for the show running-config command on the router. This
AAA set up
Policy map
ATM VC
PPPoA
DBS enabled
Virtual template
RADIUS server
Applying QoS Parameters Dynamically to Sessions
Cisco 10000 Series Router Quality of Service Configuration Guide
17-33
Advertisement
Chapters
Table of Contents
