hit counter script

Accounting Updates; Service Category Transitions; Dynamic Bandwidth Selection And Oversubscription - Cisco 10000 Series Configuration Manual

Quality of service configuration guide
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Chapter 17
Configuring Dynamic Subscriber Services

Accounting Updates

When dynamic bandwidth selection applies QoS values for a user, it sends an accounting record to the
RADIUS server. The accounting records contain accounting attributes such as the following:
Cisco-Avpair = "peak-cell-rate=155000" [flags = 0x00014000]
Cisco-Avpair = "sustainable-cell-rate=145000" [flags = 0x00014000]

Service Category Transitions

Table 17-1
bandwidth selection (DBS).
Table 17-1 Supported Service Category Transitions
From Service Category
Any
UBR-unshaped
UBR-PCR (shaped)
VBR-nrt
UBR-PCR
VBR-nrt
In DBS, the router does not allow you to change a VC traffic class, regardless of the atm pxf queuing
mode of the router. For example, if you have a shaped UBR and DBS downloads peak cell rate (PCR)
and sustained cell rate (SCR) values from RADIUS, the router does not convert the VC to VBR-nrt.
Instead, the VC remains shaped UBR with the PCR configured. The router accepts or rejects the session
on the VC as described below:

Dynamic Bandwidth Selection and Oversubscription

In releases prior to Cisco IOS Release 12.3(7)XI2, if you simultaneously configure dynamic bandwidth
selection (DBS) and VC oversubscription, RADIUS-provided QoS parameters are not set for some ATM
VCs.
In Cisco IOS Release 12.3(7)XI2 and later releases, the router supports VC oversubscription on VCs that
are modified using DBS. You can simultaneously configure DBS and VC oversubscription without any
adverse affect on the VC's rate modification.
OL-7433-09
lists the service category transitions supported on the Cisco 10000 series router for dynamic
If the downloaded PCR and SCR parameters are defined as mandatory attributes in RADIUS, the
router rejects the session.
If the downloaded PCR and SCR parameters are defined as non-mandatory attributes in RADIUS,
the router accepts the session on the VC without changing the VC's traffic class or parameters.
Applying Traffic Shaping Parameters Using RADIUS Profiles
To Service Category
UBR-unshaped
Any
VBR-nrt
UBR-PCR
UBR-PCR
VBR-nrt
Cisco 10000 Series Router Quality of Service Configuration Guide
Transition
Reject
Reject
Reject
Reject
Accept
Accept
17-7

Advertisement

Table of Contents
loading

Table of Contents