Cisco 10000 Series Configuration Manual page 589
Quality of service configuration guide
Hide thumbs
Also See for 10000 Series:
- Configuration manual (370 pages) ,
- Troubleshooting manual (70 pages) ,
- Installation manual (14 pages)
Table of Contents
Advertisement
Chapter 17
Configuring Dynamic Subscriber Services
!
!
controller SONET 2/0/0
no framing
shutdown
!
!
vc-class atm pppoa
vbr-nrt 60 60
dbs enable/* Enables dynamic bandwidth selection on VC class.*/
encapsulation aal5mux ppp Virtual-Template1
!
vc-class atm pppoaRange
vbr-nrt 50 50
dbs enable/* Enables dynamic bandwidth selection on VC class.*/
encapsulation aal5mux ppp Virtual-Template1
!
interface FastEthernet0/0/0
ip address 10.14.0.25 255.255.0.0
no ip proxy-arp
full-duplex
!
interface POS1/0/0
no ip address
crc 32
!
interface ATM3/0/0
no ip address
atm flag s1s0 0
atm sonet stm-4
no atm ilmi-keepalive
pvc 0/16 ilmi
!
!
interface Serial4/0/0
no ip address
!
interface GigabitEthernet5/0/0
ip address 192.168.1.1 255.255.255.0
negotiation auto
!
interface POS6/0/0
no ip address
crc 32
!
interface ATM8/0/0
atm pppatm passive
no ip address
no atm pxf queuing
atm sonet stm-4
no atm ilmi-keepalive
!
interface ATM8/0/0.1 point-to-point
atm pppatm passive
pvc 10/100
vbr-nrt 40 40
dbs enable/* Enables dynamic bandwidth selection on PVC.*/
encapsulation aal5mux ppp Virtual-Template1
!
!
interface ATM8/0/0.2 point-to-point
atm pppatm passive
pvc 22/222
class-vc pppoa
OL-7433-09
Applying Traffic Shaping Parameters Using RADIUS Profiles
Cisco 10000 Series Router Quality of Service Configuration Guide
17-15
Advertisement
Chapters
Table of Contents
