Verification Example For Dynamic Vc Weights And Watermarks - Cisco 10000 Series Configuration Manual
Quality of service configuration guide
Hide thumbs
Also See for 10000 Series:
- Configuration manual (370 pages) ,
- Troubleshooting manual (70 pages) ,
- Installation manual (14 pages)
Table of Contents
Advertisement
Chapter 17
Configuring Dynamic Subscriber Services
Command
Router# show atm vc [vcd | interface
interface-number]
Router# show atm pvc dbs
Router# show atm pvc vpi/vci
Verification Example for Dynamic VC Weights and Watermarks
Example 17-12
information about a particular VC. As indicated in the example, the high watermark for VCD 2 is set to
240 and the low watermark is set to 224. The weight is set to 12.
Example 17-12 Sample Output for the show atm vc Command
Router# show atm vc 2
ATM7/0/0: VCD: 2, VPI: 1, VCI: 100
UBR, PeakRate: 599040 (1412831 cps)
CDVT: 178.5 Usecs, High Watermark: 240, Low Watermark: 224
AAL5-LLC/SNAP, etype:0x0, Flags: 0xC20, VCmode: 0x0, Encapsize: 12
Channel Weight: 12
OAM frequency: 0 second(s)
InARP frequency: 15 minutes(s)
High Watermark: 240, Low Watermark: 224
InPkts: 25, OutPkts: 26, InBytes: 626, OutBytes: 563
InPRoc: 26, OutPRoc: 26, Broadcasts: 0
InFast: 0, OutFast: 0
InPktDrops: 0, OutPktDrops: 0
Out CLP=1 Pkts: 0
OAM cells received: 0
OAM cells sent: 0
Status: UP
DBS enabled.
PPPoA Current State = LCP_NEGOTIATION
PPPoA Latest Event = PPP Msg
PPPoA Latest Error = None
PPPoA Session ID = 4
PPPoA Handle = 0xA8000003, SSS Handle = 0x00000000
Switch Handle = 0xF5000003, PPP Handle = 0x18000005
AAA Unique ID = 0x00000005, AIE Handle = 0xBE000003
OL-7433-09
Purpose
Displays traffic information about all ATM permanent virtual
circuits (PVCs).
(Optional) vcd is a specific virtual circuit. When you specify a
VC, information displays about only that VC.
(Optional) interface interface-number is an interface or
subinterface number. When you specify an interface, information
displays about all of the PVCs configured on the specified
interface or subinterface.
Displays all of the PVCs with dynamic bandwidth selection
(DBS) enabled and that have QoS parameters applied using
RADIUS.
Displays detailed information about an individual PVC.
vpi/ is the virtual path identifier. The slash is required.
vci is the virtual channel identifier.
shows sample output for the show atm vc command, which enables you to display
Cisco 10000 Series Router Quality of Service Configuration Guide
Dynamically Changing VC Weight and Watermark Values
17-23
Advertisement
Chapters
Table of Contents
