Cisco 10000 Series Configuration Manual page 617
Quality of service configuration guide
Hide thumbs
Also See for 10000 Series:
- Configuration manual (370 pages) ,
- Troubleshooting manual (70 pages) ,
- Installation manual (14 pages)
Table of Contents
Advertisement
Chapter 17
Configuring Dynamic Subscriber Services
Example 17-26
session uid command, based on a nested hierarchical policy.
Example 17-26 Sample Output of a Hierarchical Policy
Router# show subscriber session
Current Subscriber Information: Total sessions 1
Uniq ID Interface
36
Router# show policy-map parent
Policy Map parent
Class class-default
Router# show policy-map child
Policy Map child
Class voice
Class video
Router# show policy-map session uid 36
SSS session identifier 36 -
SSS session identifier 36 -
Service-policy output: parent
Class-map: class-default (match-any)
OL-7433-09
shows sample output for the show policy-map session command and show policy-map
State
Vi2.1
authen
Average Rate Traffic Shaping
cir 10000000 (bps)
service-policy child
priority
police 8000 9216 0
conform-action transmit
exceed-action drop
violate-action drop
bandwidth remaining 80 (%)
0 packets, 0 bytes
30 second offered rate 0 bps, drop rate 0 bps
Match: any
0 packets, 0 bytes
30 second rate 0 bps
Queueing
queue limit 250 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
shape (average) cir 10000000, bc 40000, be 40000
target shape rate 10000000
Service-policy : child
queue stats for all priority classes:
Queueing
queue limit 16 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
Class-map: voice (match-all)
0 packets, 0 bytes
30 second offered rate 0 bps, drop rate 0 bps
Match: ip precedence 5
Priority: Strict, burst bytes 1500, b/w exceed drops: 0
Shaping PPPoE Over VLAN Sessions Using RADIUS
Service
Identifier
Local Term
peapen@cisco.com
Cisco 10000 Series Router Quality of Service Configuration Guide
Up-time
00:01:36
17-43
Advertisement
Chapters
Table of Contents
