Cisco 10000 Series Configuration Manual page 743
Quality of service configuration guide
Hide thumbs
Also See for 10000 Series:
- Configuration manual (370 pages) ,
- Troubleshooting manual (70 pages) ,
- Installation manual (14 pages)
Table of Contents
Advertisement
Chapter 19
Configuring Quality of Service for PVC Bundles
Command
Router# debug frame-relay adjacency {pvc [dlci] |
vc-bundle [vc-bundle-name]}
Router# debug frame-relay vc-bundle {detail |
state-change} [vc-bundle-name]
Router# show frame-relay vc-bundle
{vc-bundle-name] [detail]
Router# show frame-relay map
Router# show frame-relay pvc
Router# show frame-relay ip rtp
header-compression [interface type number]
OL-7433-09
Purpose
Displays information about an adjacent node that has one or more
Frame Relay PVCs or PVC bundles.
pvc indicates to display information about the adjacent PVC only.
(Optional) dlci is the data-link connection identifier (DLCI) for a
specific PVC.
vc-bundle indicates to display information regarding the adjacent
PVC bundle and its members.
(Optional) vc-bundle-name is the name of the PVC bundle.
Displays information about the Frame Relay PVC bundles
configured on a router.
Use this command to monitor state changes and Inverse ARP
activity for one or all of the PVC bundles and bundle members
configured on a router.
detail indicates to display detailed information about the
members of the specified bundle. If you do not specify a
vc-bundle-name, detailed information about the members of all
PVC bundles displays.
Using the detail keyword generates a large number of
Note
debug messages that can quickly fill up a log buffer.
state-change indicates to display information pertaining only to
the state changes of the specified PVC bundle and PVC bundle
members. If you do not specify a vc-bundle-name, state-change
information for all PVC bundles and bundle members displays.
(Optional) vc-bundle-name specifies a particular PVC bundle.
Displays status, bumping information, protection information,
and active and configured precedence or DSCP levels for the
PVCs in a PVC bundle.
vc-bundle-name is the name of the Frame Relay PVC bundle.
detail displays output packet count information in addition to the
other bundle member attributes for each PVC in the bundle.
Displays the current Frame Relay map entries and information
about the connections.
Displays PVC statistics for the PVC-bundle members.
Displays Frame Relay Real-Time Transport Protocol (RTP)
header compression statistics.
(Optional) interface type number specifies the interface type and
number.
Cisco 10000 Series Router Quality of Service Configuration Guide
Frame Relay PVC Selection
19-51
Advertisement
Chapters
Table of Contents
